Calling From A Residential Station; Calling From The Doorbell Button; Calling Entrance Stations - Aiphone 0311 A OI Operation Manual

3-4

Calling from a residential station

1
When a call is received from a residential station, a call tone will sound for approxi-
mately 10 seconds and the room number and resident name will be displayed.
2
Lift the handset to respond.
3-5

Calling from the doorbell button

1
When the doorbell button is pressed, a call tone will sound while the button is being pressed.
• A different call tone sounds. (Communication is not possible.)
3-6

Calling entrance stations

1
Lift the handset and press the 10 key [ ] button.
2
Use the 10 key to select the desired entrance station.
With the expanded system, the display number of the entrance station varies depending
on the common line connection of the entrance station and security guard station.
Connected to same common line: "Set number" is displayed as is
Ex.) Calling entrance station #1: Enter [1]
Connected to separate common line: "Set number + 8"
Ex.) Calling entrance station #1: 1 + 8 = 9, so enter [9]
3
When you are done talking, hang up the handset to end the call.
NOTES: If a call is not responded to, a record is kept.
The communication will be ended automatically after approximately 1
minute when hands-free communication is used at the residential sta-
tion or after approximately 3 minutes when the handset is used.
3
Press the button to communicate with the entrance station. If there
is no corresponding entrance station, "DENIED" will be displayed.
• While in communication, you can use the light button and door release but-
ton.
4
When you are done talking, hang up the handset to end the call.
• Communication ends automatically after approximately 3 minutes.
- 10 -