Quick Bypass; Chime Mode - ADT K5309V2 User Manual

If programmed, "Quick Bypass" allows you to easily bypass all open (faulted) zones
without having to enter zone numbers individually. This feature is useful if, for
example, you routinely leave certain windows open when arming at night.
1.
(Security Code)
In a few moments, all open zones will be displayed
and automatically bypassed.
zones that you wish to leave unprotected are bypassed, and
that there are no other zones unintentionally left open.
2. Wait for all bypassed zones to be displayed, then arm
the system as desired.
Ask your installer if "Quick Bypass" is active for your
system, and if so, check here:
CHIME mode alerts you to the opening of a perimeter door or window while the
system is disarmed. When Chime mode is activated:
Three tones sound at the touchpad whenever a perimeter door or window is opened.
Interior zones do not produce a tone when they are faulted.
Pressing the READY key will display the open protection points.
To turn Chime Mode on/off
(Security Code)
The CHIME message appears when on. Perimeter
zones will cause a tone when faulted.
The CHIME message disappears when Chime mode
is off.
Voice Chime: You can set the Voice Touchpads (if installed) to announce faulted
(opened) entry/exit or perimeter zones whenever normal Chime mode is on.
To turn Voice Chime Mode on or off:
(normal Chime mode must be on first)
When Voice Chime is on, any faulted zone(s) causes a voice status announcement,
chime and display. When off, the sounder still provides chime if normal Chime
mode is on.
– 20 –
+ 6 + [#]
BYPASS
Make sure that only those
(system must be disarmed)
+ 9
CHIME
English Display: NOT READY
English Display: BYPASS
:
English Display: READY
English Display: CHIME
# + 0 + 2 + 4