Canon imageFormula DR-9050C User Manual page 133

■ [First Counter] and [Second Counter] Dialog
Boxes
Make settings for add-on counters.
[Start Value]
Enter the start value for the counter.
[Increment]
Enter the increment value for the counter. The counter
increases by the value entered here.
[Increment Trigger]
Specifies the type of event that triggers a counter
increment.
[New File] (ISIS driver only)
The counter increases when a batch separation occurs
according to the Batch Separation settings on the [Others]
tab sheet. (See "Batch Separation" on p. 8-20.)
[Every Page]
Increments once per page.
[None]
No counting up.
Chapter 8 ISIS/TWAIN Driver Settings
[Reset Value]
Select the initial value when the counter is reset.
[Reset Trigger]
Select the trigger for resetting the counter.
[New File] (ISIS driver only)
The counter is reset when a batch separation occurs
according to the Batch Separation settings on the [Others]
tab sheet. (See "Batch Separation" on p. 8-20.)
[Every Page]
Resets the counter once per page.
[None]
No counter reset occurs.
8-28