Canon imageFormula DR-9050C User Manual page 129

[Checksum]
Read the checksum included in barcodes.
[Output Checksum]
This check box is enabled when [Checksum] is selected,
and outputs the read checksum.
[Output ST/SP]
Select this check box to output Start and Stop codes.
Codabar
Detect Codabar barcodes.
[Enable]
Detect and read Codabar barcodes.
[Checksum]
Read the checksum included in barcodes.
[Output Checksum]
This check box is enabled when [Checksum] is selected,
and outputs the read checksum.
[Output ST/SP]
Output Start and Stop codes included in barcodes.
[Method]
Select the checksum calculation method.
Code 128
Detect Code 128 barcodes.
[Enable]
Detect and read Code 128 barcodes.
Chapter 8 ISIS/TWAIN Driver Settings
ITF
Detect ITF barcodes (including industrial 2 of 5).
[Enable]
Detect and read ITF barcodes.
[Checksum]
Read the checksum included in barcodes.
[Output Checksum]
This check box is enabled when [Checksum] is selected,
and outputs the read checksum.
UPC
Detect UPC-A/UPC-E barcodes.
[Enable]
Detect and read UPC-A/UPC-E barcodes.
[Addon]
Set how to handle addon codes included in barcodes.
Off: Ignore addon codes.
On: Read addon codes.
Auto: Detect and read addon codes automatically.
[Checksum]
Read the checksum included in barcodes.
8-24