Calibrating Pitch And Roll; Adjusting Warning Angles; Enabling Or Disabling Warning Angle Alerts; Viewing The Altimeter, Barometer And Compass - Garmin TREAD OVERLAND EDITION Owner's Manual

Calibrating Pitch and Roll

You can set the angle of your vehicle to zero at any time.
1 Park your vehicle on a flat, level surface.
2 Adjust the position of your device in the mount so you can comfortably view the screen.
3 From the main menu, swipe to the left and select Pitch and Roll > Calibrate.
The values for pitch and roll reset to 0 degrees.
To maintain the best accuracy, you must calibrate pitch and roll each time you reposition your device.

Adjusting Warning Angles

You can adjust the angles at which the device activates a pitch or roll alert. You are responsible for knowing and
setting the correct pitch and roll angle for your vehicle.
1 From the main menu, swipe to the left and select Pitch and Roll > > Warning Angles.
2 Swipe up or down to adjust the pitch or roll warning angles.
3 Select Accept.

Enabling or Disabling Warning Angle Alerts

1 From the main menu, swipe to the left and select Pitch and Roll > .
2 Select an option:
• To enable or disable pitch and roll notifications, select Pitch and Roll Notifications.
• To enable or disable audible alerts, select Audible Alerts.

Viewing the Altimeter, Barometer and Compass

The device contains internal altimeter, barometer and compass sensors with automatic calibration.
Select > Adventure > ABC.
TIP: you can also select the Altimeter or Barometer widget to open the ABC app.

Calibrating the compass

Calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near metal objects or
objects that influence magnetic fields, such as vehicles, electronic devices, buildings or overhead power lines.
When your device is connected to the mount, it uses GPS data to determine your compass heading. When you
remove the device from the mount, it uses a built-in compass to show your heading.
Each time you disconnect your device from the mount, the device prompts you to calibrate the compass.
If you experience irregular compass behaviour, for example, after moving long distances or after extreme
temperature changes, you can manually calibrate the compass to improve accuracy.
1 Disconnect the device from the mount and move away from objects that influence magnetic fields.
2 From the main menu, swipe to the left and select Altimeter > > Calibrate Compass.
3 Follow the on-screen instructions.

Group Ride

The Group Ride app allows you to coordinate rides and communicate with nearby riders using preset text
messages, live map locations and voice communications.
NOTE: before you can use the Group Ride app, you must install a Group Ride accessory. Go to
purchase a Group Ride accessory.
Off-Road Navigation Features
WARNING
NOTICE
garmin.com to
9