Recording Tracks; Navigating A Track; Viewing Your Collections On The Map; Pitch And Roll - Garmin TREAD Owner's Manual

Recording Tracks

Tracking records your path. When you start tracking, your device logs your location and updates the track line. If
your device is paired with a Garmin Explore
the app.
1 From the main menu, swipe to the left and select Track Recorder.
2 Select Start.

Navigating a Track

You can navigate a saved track using the Garmin Explore app on your device.
1 Select > Adventure > Explore > Tracks.
2 Select a track.
3 Select Go!.

Viewing Your Collections on the Map

Before you can view the Collections map layer, you must pair your device with the Tread app and sync your
device with your Garmin Explore account.
You can view your Garmin Explore collections directly on the map. You must enable the collections map layer to
use this feature.
NOTE: If you do not assign a collection category to your Garmin Explore data, it appears as an unorganized
collection.
1 Select View Map >
2 Select one or more collection categories from the list.
3 Select Save.
Your collections appear as icons on the map.

Pitch and Roll

The Pitch and Roll application is intended to show vehicle angles based on calibrated measurements only. You
are responsible for calibrating the device. Changes to the position of the device after calibration may affect the
accuracy of its measurements. Measured values are suggestions only based on your input into the device. Take
readings often and carefully, and allow the readings to stabilize after significant changes in environmental
conditions. Always allow a margin of safety for changing conditions and reading errors. Failure to account for
your vehicle and your environment could cause an incident resulting in death or serious injury.
The device alerts you if your vehicle pitches or rolls at an angle that could affect the vehicle's stability.

Calibrating Pitch and Roll

You can set the angle of your vehicle to zero at any time.
1 Park your vehicle on a flat, level surface.
2 Adjust the position of your device in the mount so you can comfortably view the screen.
3 From the main menu, swipe to the left and select Pitch and Roll > Calibrate.
The values for pitch and roll reset to 0 degrees.
To maintain the best accuracy, you must calibrate pitch and roll each time you reposition your device.
Off-Road Navigation Features
account, your device periodically synchronizes recorded tracks with
™
> Collections.
WARNING
WARNING
11