Registering Scanning Conditions - Canon imageFORMULA DR-2010M User Manual

Registering Scanning Conditions

This section describes the procedure for registering specified scanning
conditions.
Under Windows
Specify the scanning conditions as necessary on the [Basic] tab,
[Brightness] tab, [Image processing] tab, and [Others] tab of the
ISIS/TWAIN driver properties dialog box.
Click the [Basic] tab → click [Save].
Enter a name for [Save user preference as] → click [OK].
93
Back
Contents
Under Mac OS X
Switch to Advanced Mode, make the necessary settings, and then select
[Add/Delete] for [Favorite Settings].
Enter a name into the [Setting Name] field, and then click [Add].
Click [Save] to close the dialog box.
Previous Page Next Page