Selecting Scan Jobs - Canon imageFORMULA DR-2010M User Manual

[Button assignment] tab
Configure settings to assign the job to a job button on the scanner. If
[Assign scanner button 1 to Scan First] is selected in the main screen,
assignment to job button 1 is not available.
Click the [OK] button.
The job is registered according to the configured settings and appears in
the job list.
To confirm the settings of a registered job or to change the settings, click
the [Job list/edit] button.
44
Back
Contents

Selecting Scan Jobs

Place the document in the scanner.
Click the [Select Scan Job] tab.
The main screen for [Select Scan Job] appears.
Click a job in the [Job list].
Previous Page Next Page