Advertisement
In case of a malfunction of the dryer, one the following failure codes could be
displayed:
FAILURE CODE
F01 – F04
F05
F06
F07
F10 – F24
Start LED blinks 2
times per second
when pressed
Bottom filter LED
is blinking, Start
LED blinks 2 times
per second when
pressed
4
FAILURE CODES
You can check yourself before calling the After-Sales
Please call the After-Sales Service.
Turn the dryer OFF and unplug it. Make sure that the room
temperature is between 5°C and 35°C. Wait for 1 hour. Plug the
dryer back in and restart it. If the failure reoccurs, please call the
After-Sales Service.
Turn the dryer OFF and unplug it. Make sure that the room
temperature is between 5°C and 35°C. Wait for 1 hour. Plug the
dryer back in and restart it. If the failure reoccurs, please call the
After-Sales Service.
Turn the dryer OFF and unplug it. Make sure that the room
temperature is between 5°C and 35°C. Unload approximately one
half of the laundry from the dryer. Wait for 1 hour. Plug the dryer
back in and restart it. If the failure reoccurs, please call the
After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 30 minutes. Plug the
dryer back in and restart it. If the failure reoccurs, please call the
After-Sales Service.
Make sure that the door is correctly closed and the bottom filter
correctly positioned.
If the failure reoccurs, please call the After-Sales Service.
Make sure that the bottom filter is correctly positioned.
If the failure reoccurs, please call the After-Sales Service.
Service.
Advertisement
