Pick Up Assembly; Base Up/Down - LG UBK80 Service Manual

DECK MECHANISM DISASSEMBLY
5
Rubber
Damper
4
< Figure F >

4. Pick Up Assembly

1) Detach the Gasket Tape.
2) Disconnect the wires (BLK, RED, BRN, ORN)
from the Deck PCB Assembly by desoldering.
3) Remove the 4 screws (S2).
4) Disconnect the FFC Cable from the Pick Up
Assembly.
5) Remove the 4 Rubber Dampers.
(S2)
Pick Up
Assembly
3
2
FFC Cable

Base Up/Down

1
(B)
(L2)
1
Base Main
Figure G-1
5. Base Up/Down
Unlock the Locking Tab (L2) in direction of arrow
and then lift up the Base Up/Down to separate it
from the Base Main.
Note
• When reassembling move the Guide in direction
of arrow (A) until it is positioned as Figure G-1.
• When reassembling insert the (B) portion of the
Base Up/Down in the (C) portion of the Guide as
Figure G-2.
• When reassembling insert the (D) portion of the
Base Up/Down in the Hole (H2) of the Base Main
as Figure G-3.
4-4
Copyright © 2020 LG Electronics Inc. All rights reserved.
3
2
Figure G-3
(C)
(A)
(B)
Figure G-2
< Figure G >
Only for training and service purposes.
(D)
(H2)
Guide
Base
Up/Down