How To Use The Bar-Code Scan Tool; Bar-Code Scan System Configuration; Pick-Up Bar-Code Scan Tool Configuration - LG BD370 Service Manual

HOw TO USE THE BAR-CODE SCAN TOOL

bar-Code scan tool inserts the bar-code values (including skew, Read power, hFm, Ld power and so on) to
the Flash-ROm in the Loader main board. so, In case of changing the traverse assembly or Loader main board,
It is required to pick-up bar-code scan procedure.

1. BAR-CODE SCAN SYSTEM CONFIGURATION

In order to insert bar-code values (including skew, Read power, hFm, Ld power and so on), the following
equipments are needed.
Compulsory equipments
1) personal Computer
2) bar-Code scan tool (Loader tester)
3) 2d bar-Code scanner
4) target Loader Ass'y
5) Usb to sAtA Connector
6) power supply

2. PICK-UP BAR-CODE SCAN TOOL CONFIGURATION.

the Loader tester is the Application tool for FA test and also bar-Code scan.
the bar-Code scan is the one of functions in the Loader tester.
therefore the bar-Code scan Users should check "only bar Code" up in the Loader tester.
Loader tester program consists of total 2 files.
Setup.exe
Setup.exe.txt
Setup.exe file is the installation file.
After you install the Loader tester program, the LoaderTest.exe file will appear in the wallpaper(background)
of windows.
LoaderTester.exe is a program execution file.
Setup.exe.txt is the install Report file.
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4-9
LGE Internal Use Only