LG UBK80 Service Manual page 28

DIGITAL DISPLAY & MEDIA TRAINING MASTER
2-5. Invalid Format or Format Not Supported
Is the customer using
a digital cable connection?
YES
Is the customer using
an analog cable connection?
YES
Is the display
HDCP compliant?
YES
Has the customer tried the
device on another display?
YES
Has the customer tried
another cable?
Make sure the customer's simultaneously connecting analog
component cable with HDMI cable. And then If Copy Protected Disc
NO
is playing back, analog component output is no picture. Only when
the analog output is 480i, you can see the picture. In case of No Copy
Protected Disc, you can see the picture regardless of the resolution.
Customer's using an DVI or HDMI cable connection
need to set the resolution on the product. Actually our BD can support
NO
480i ~ 1080p but some TVs can just support specific resolution so
in order to match resolution between TV & BD P user can choose
Make sure the display is HDCP compliant when using a DVI or
NO
HDMI connection. A lack of HDCP compliancy on the display may
cause an invalid format or format not supported message to appear.
It can also cause a copy protection OSD to appear.
Ask the customer to connect the device to another display.
NO
If the device starts working, then the problem may be the original display.
The customer will need to troubleshoot the display. If the device
still does not work, then the problem may be the device or the cable.
Ask the customer to replace the cable between the device and display.
NO
If the problem is corrected, then the problem was with the cable.
If the problem continues, then the device is the problem.
Set up service according to in warranty or out of warranty procedures.
3-11
AUTO mode at the setup menu.
Copyright © 2020 LG Electronics Inc. All rights reserved.
Only for training and service purposes.