Table of Contents
Advertisement
[2] OPERATION MANUAL
Remote Control
NOTE
• When using the remote control unit, point it at the TV.
1
POWER: Switch the power on or enter standby mode.
2 MUTE: Mute the sound.
3 INPUT: Select a TV input source.
4 0–9: Set the channel.
5 • (DOT)
6 DISPLAY: Display the current channel (or input source)
information on the screen.
7 VOL +/-: Set the volume.
8
(Enter): Confirm a selected item.
9 Navigation buttons: Select a desired item on the screen.
10 CC: Display captions during closed-caption source.
11 SURROUND: Display the surround setting menu.
12 FREEZE: Set the still image. Press again to return to
normal screen.
13 Sticker: No function.
14 EXIT: Turn off the menu screen.
15 FAVORITE CH:
A, B, C, D: Select 4 preset favorite channels in 4 different
categories. While watching, you can toggle the selected
channels by pressing A, B, C and D.
16 ENT: Jumps to a channel after selecting with the 0–9
buttons.
17 MENU: Display the menu screen.
18 CH +/-: Select the channel.
19 VIEW MODE: Select the Picture Mode.
20 AV MODE: Select an adjusted picture settings. (Standard,
Movie, Power Saver, User, Dynamic)
21 FLASHBACK: Press to switch to the previously tuned
channel. Press again to switch back to the currently tuned
channel.
22 SLEEP: Allows you to set a time when the TV
automatically switches to standby. This display will disappear
after few seconds, and the sleep timer starts to count down
automatically.
• If you want to adjust the sleep timer again, you can press
this button repeatedly then change the time setting.
• The TV will enter into the standby mode when the remaining
time reaches zero.
23 AUDIO: Display the MTS/SAP setting menu.
24 RETURN: Return to the previous menu screen.
25
5
LC-42SV32B
Advertisement
Table of Contents
