Table of Contents
Advertisement
LC-42SV32B
x. Extra peripheral circuit on CVBS signal data path
xi. External SAW filter and IF VGA on tuner
Peripherals
MT5366RANG support three built-in UARTs with Tx and Rx FIFO, MT5365 support two UART (one is muxed with GPIO).
MT5366RANG support MII/RMII interface (built-in Ethernet MAC), MT5365 support RMII only.
Seven basic serial interfaces; one is for the tuner, one is the master for general purpose, and one is the slave for VGA DDC, the other four extra slave
serial interfaces used for HDMI EDID data (three are muxed with GPIO).
MT5366RANG support three PWMs, MT5365 support two PWMs (one is muxed with GPIO).
IR receiver
Real-time clock and watchdog controller
Built-in 2-link USB2.0/1.1,USB port0 supports external hub,
Built-in uP for standby mode
Support SDIO interface pin muxed with smart card
Supports two serial flash or one serial and one NAND flash
MT5366RANG supports six-input low-speed ADC, MT5365 support five-input low-speed ADC.
Supports boundary scan (JTAG)
IC Outline
The MT5366RANG is 21x21mm 479 balls PBGA Package, MT5365 is 256-pin LQFP package with EPAD
3.3V/1.12V/1.2V and 1.8V for DDR2 or 1.5V for DDR3
2.2 U703(AT1529F11U)
General Description
The AT1529 high-efficiency, DC/DC buck converter delivers up to 3.2A of output current. The device operates from an input voltage of 2.5V to 6V and
provides an output voltage from 0.8V to VIN, making the AT1529 ideal for on-board post-regulation applications.
The AT1529 operate at a fixed frequency of 1MHz with an efficiency of up to 94%. The high operating frequency minimizes the size of external
components. Internal soft-start control circuitry reduces inrush current. Short-circuit and thermal-overload protections improve design reliability.
The AT1529 are available in a space-saving SOP-8 and TDFN3X3-8 package.
Features
Ceramic Input and Output Capacitors
Efficiency Up to 94%
Operate from 2.5V to 6V supply
Adjustable Output from 0.8V to VIN
Internal Soft-Start
Short-Circuit and Thermal-Overload Protection
Input Over Voltage Protection
RoHS Compliant
Applications
ASIC/DSP/µP/FPGA Core and I/O Voltages
Set-Top Boxes
Cellular Base Stations
Networking and Telecommunications
2.3 U602(STA339BWTR)
General Description
The STA339BW is an integrated solution of digital audio processing, digital amplifier control, and FFX-power output stage, thereby creating a high-power
single-chip FFX® solution comprising high-quality, high-efficiency, all digital amplification.
STA339BW is based on FFX (fully flexible amplification) processor, a STMicroelectronics proprietary technology. FFX is the evolution and the enlargement
of the ST ternary technology: the new processor can be configured to work in ternary, binary, binary differential and phase shift PWM modulation schemes.
STA339BW contains the ternary, binary and binary differential implementations, a subset of the full capability of the FFX processor.
42
Advertisement
Table of Contents
