Table of Contents
Advertisement
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1:
STAND COVER/STAND ASS'Y/DAMMY CARD
(Refer to Fig. 1-1)
Remove the 1 screw 1.
1.
2.
Remove the Stand Cover in the direction of arrow (A).
Remove the 4 screws 2.
3.
4.
Remove the Stand Ass'y in the direction of arrow (B).
5.
Remove the Dammy Card in the direction of arrow (C).
1-2: BACK CABINET (Refer to Fig. 1-2)
Remove the 9 screws 1.
1.
2.
Remove the Back Cabinet in the direction of arrow.
1
1
1
Back Cabinet
DISASSEMBLY INSTRUCTIONS
1
Stand Cover
(A)
2
2
2
2
(B)
Stand Ass'y
Dammy Card
(C)
Fig. 1-1
1
1
1
1
1
1
Fig. 1-2
1-3: ANGEL EARTH-1/DIGITAL PCB (Refer to Fig. 1-3)
1.
Disconnect the following connectors:
(CD003 and CP505).
Remove the 7 screws 1.
2.
3.
Remove the Angel Earth-1 and Digital PCB in the
direction of arrow.
1-4: PCB ASS'Y (Refer to Fig. 1-4)
1.
Disconnect the following connector: (CP202).
Remove the 3 screws 1.
2.
3.
Remove the Operation PCB in the direction of arrow (A).
4.
Disconnect the following connectors:
(CP3201, CP801 and CP802).
Remove the 4 screws 2.
5.
6.
Remove the Scaler PCB in the direction of arrow (B).
7.
Disconnect the following connectors:
(CP503, CP302, CP303, CP6700, CP6701, CP6702,
CP6703 and CP6704).
Remove the 7 screw 3.
8.
Remove the 9 screws 4.
9.
10.
Remove the AV PCB and Back Light PCB in the
direction of arrow (C).
11.
Disconnect the following connectors:
(CP503 and CP2201).
Remove the 2 screw 5.
12.
13.
Remove the Remocon PCB in the direction of arrow (D).
14.
Remove the Holder PCB Tuner.
15.
Remove the Tuner PCB in the direction of arrow (E).
B1-1
1
1
1
1
1
1
Digital PCB
Angel Earth-1
1
Fig. 1-3
Advertisement
Table of Contents
