Samsung SCH-R261 User Manual page 87

Portable tri-band mobile phone
Hide thumbs Also See for SCH-R261:
Table of Contents

Advertisement

Tips for Adapting Digit Dialing
Use Adapt Digits in a quiet place.
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
In standby mode, press
1.
select Voice Settings
Press OK to begin the adapt digits process.
2.
Your phone displays the first digit sequence and "Please
say" plays through the speaker followed by the four digits
displaying on the screen.
Wait for the beep and say the digits using your normal tone
3.
of voice. After a moment, the phone plays back the
recording and prompts "Did the recording sound ok?"
• If the recording was good, say "Yes."
Menu
Voice SVC, then
Digit Dialing
Adapt Digits.
• If you need to re-record, say "No."
If you say "No," the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you're satisfied with the recording.
After confirming that the recording sounds "ok", continue
4.
the recording process with the next set of digits.
After six sets of digits, the phone asks whether you want to
5.
do more adaptation. Answer "Yes."
Repeat steps 4 and 5 for another six sets of digits. After
6.
the second group of six sets of digits, "Adaptation
complete" plays through the speaker and you are returned
to the Adapt Digits menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
In standby mode, press
1.
sub-menu, select Voice Settings
Reset Digits.
The phone prompts you to confirm digit reset.
Press the OK soft key to reset your digit adaptation.
2.
Menu
Voice SVC
Digit Dialing
Tools
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents