Samsung SCH-R261 User Manual page 41

Use the Navigation key to review the information for the
3.
entry that you wish to change, then press
Edit Contact screen displays on the screen.
Highlight the particular information you want to add or
4.
change.
• Press to backspace and delete numbers or letters.
• Press and hold to clear all numbers or letters in the
highlighted field.
• Press Options and select one of the following:
– Set Speed Dial / Remove speed dial: Assign/remove a speed dial
number. (For more information, refer to "Speed Dial" on page 39.)
– Set as default: Set the number the phone will dial when Contacts
dialing or speed dialing.
– Wait: A hard pause (waits for input from you).
– 2-Sec Pause: A 2-second pause after which dialing resumes. (For
more information, refer to "Add Pauses to Contacts Numbers"
on page 37.)
Press to save your changes.
5.
– or –
Press to discard your changes and press No at the
prompt.
Add Pauses to Contacts Numbers
Edit. The
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
Wait: Stops the calling sequence until the phone receives further input.
•
2-Sec Pause: Stops the calling sequence for two seconds, then sends
•
the remaining digits.
Note: You can enter multiple 2-Sec Pauses to extend the length of a pause.
For example, two consecutive 2-Sec Pauses cause a total pause time
of four seconds. Keep in mind that pauses count as digits towards the
32-digit maximum.
To add pauses to a Contacts entry number, do the following:
In standby mode, press Contacts and locate the Contacts
1.
entry associated with the number in which to include one
or more pauses. (For more information, refer to "Finding a
Contacts Entry" on page 34.)
Select and edit the desired number. (For more information,
2.
refer to "Editing a Contacts Entry" on page 36.)
Understanding Contacts 37