Roland RD-170 Owner's Manual page 15

GChanging the split point
When you activate the Split mode, the key-
board is split at the "Gb3", i.e. the Gb key more
or less in the middle. You can, however, select a
different split point and save that setting to a
Setup memory:
Gb3
Left hand: (F#3)
LOWER
The split point can be set anywhere between
the B1 and the B6. There are two ways of
changing the split point:
• Press and hold [SPLIT] while setting the desired
split point with the [DEC÷NO]/[INC÷YES] buttons.
SPLIT
The display briefly shows the name of the note
you selected.
—OR—
Right hand:
• Press and hold [SPLIT] while pressing the desired
UPPER
key on the keyboard.
SPLIT
KEYBOARD MODE
Note: This setting can be saved to a Setup memory (see
p. 28).
Owner's Manual
LOWER UPPER
DEC
NO
KEYBOARD MODE
LOWER UPPER
INC
YES
15