Wi-Fi - Samsung SGH-T589 User Manual

Insert a memory card into the device to transfer files from
1.
or to the memory card.
Press to return to Idle mode.
2.
3. Connect the multifunction jack on your device to a PC
using an optional PC data cable.
A pop-up window displays on the PC when connected.
Open the folder to view files.
4.
Copy files from the PC to the memory card.
5.
Enabling USB Debugging
Press
1.
Applications Development.
Tap the USB debugging field to verify the feature is active
2.
before connecting your USB cable.
and then tap (Settings)

Wi-Fi

About Wi-Fi
Wi-Fi (short for "wireless fidelity") is a term used for certain
types of Wireless Local Area Networks (WLAN). Wi-Fi
communication requires access to an existing and accessible
Wireless Access Point (WAP). These WAPs can either be Open
(unsecured) as within most Hot Spots, or Secured (requiring
knowledge of the Router name and password).
Note: After you complete a connection to an active Wi-Fi network, the Wi-Fi
Calling feature will automatically be enabled. For more information,
refer to "Wi-Fi Calling" on page 54.
Activating Wi-Fi
By default, your device's Wi-Fi feature is turned off (deactivated).
Activating Wi-Fi allows your device to discover and connect to
compatible in-range WAPs (Wireless Access Points).
Press
1.
Wireless and networks
Tap Wi-Fi to activate the feature. A checkmark indicates
2.
that Wi-Fi is active. The device scans for available in-range
wireless networks and displays them under Wi-Fi networks
on the same screen.
and then tap (Settings)
Wi-Fi settings.
Connections 160