Advertisement
Available languages
Available languages
Do not disassemble batteries or throw them into a fire. Do not short-circuit batteries.
•
•
Do not mix old and new batteries.
1 Make sure the switch is in the off position, then remove the battery cover.
2 Insert two AAA alkaline batteries as illustrated.
3 Reattach the battery cover.
•
Listen for the clicking sound assuring you the cover has been properly attached.
Using your shaver
1 Slide the OFF/ON switch.
2 Hold the shaver blade flat against the skin. Hold the shaver blade so that it
is gently in contact with the skin.
Use the pop-up trimmer to cut long hairs.
•
•
Gently hold the blade in contact with the skin and move slowly.
►
Moving the shaver correctly (Fig. 2)
1 Underarm: Lift the arm to stretch the skin and shave in various directions.
2 Legs: Shave from ankles to knees.
3 Arms: Shave from outside to inside.
Washing your shaver (Fig. 3)
Switch off the shaver before cleaning.
1 Remove the frame while pressing both foil frame release buttons and wash
in water.
2 Attach the frame and wipe off all water.
3 Dry the shaver, and then attach the cap.
►
Cleaning with the brush
1. Remove the frame.
2. Remove the inner blade by pulling it straight out and clean with the brush.
Replacing the outer foil and the inner blade
►
Replacing the outer foil (Fig. 4)
1. Press the foil frame release buttons to remove the outer foil frame.
2. Squeeze the front and the back side of the foil frame and lift up one of the two
knobs on the outer foil.
3. Slip the foil into the frame and guide the plastic edges onto the hooks in the
foil frame until it clicks into place.
outer foil
inner blade
once every year
once every two years
Advertisement
