File Name Settings - Canon CAPTUREPERFECT 3.1 Operation Manual

File Name Settings

Selecting the check boxes in the Schema dialog box causes the checked information to be automatically
added to the names of files to be saved.
• The example file name reflects the effects selected by the check boxes.
• When Schema settings are performed with MultiStream settings, "Prim", "Seco", or "Tert" is added to the
specified file name.
The character strings to be added are as follows for each selected item:
• The Counter check mark cannot be cleared unless one of the following is selected: Barcode, Imprinter/
Addon, OCR, or Date.
• The Barcode, Imprinter/Addon and OCR check boxes cannot be selected at the same time.
• Barcode is valid when supported by the scanner, and when the Barcode Search scanner setting is
enabled. Up to four recognized barcode results can be added. However, the total number of characters
added cannot exceed 64.
• Selecting the OCR check box enables OCR recognition and adds the first 64 recognized characters to the
file name.
• If you use the value for Barcode or OCR, you can specify the way to add detected character strings to the
file name from the list box.
– Use detected string
Uses the detected strings as the file name. Invalid letters for file name are displayed in underscores.
– Use detected string of the back image if not detected
When no strings are detected, uses the strings detected in previous image. If there is no detected
strings in the first image, no strings are added.
26