Table of Contents
Advertisement
Using the product recovery CD-ROMs
6
Select the file system you want to use: FAT32 or NTFS.
7
Follow the instructions on the screen.
8
When the recovery process is finished, remove the product recovery CD-ROM from the drive.
9
Press any key to restart your notebook.
!
Please note that this option will delete all existing data both on the C: and D: drives before starting the recovery.
Aborting the recovery process
The recovery process always warns you when the decision you are asked to take cannot be undone.
Whenever possible, the recovery screens allow you either to go back to the previous screen, or to abort the
recovery process.
Performing an application recovery
The application recovery utility allows you to reinstall individual applications. Reinstalling a program can fix
the problems encountered if it does not run correctly anymore.
To perform an application recovery, proceed as follows:
1
Take the last product recovery CD-ROM.
2
Turn on your computer (using AC power only) and wait until Windows has booted up.
3
Insert the product recovery CD-ROM in the CD-ROM/DVD-ROM drive.
4
Open the CD-ROM/DVD-ROM drive through Windows Explorer and click on the Apps directory.
5
Open the directory which corresponds to the application that you want to recover.
6
Double-click the Setup program.
7
Follow the instructions in the Installer.
You must run the last product recovery CD-ROM from Windows.
The application will not run from DOS.
When performing an application recovery, you do not lose data on your hard disk.
n N
34
Advertisement
Table of Contents
