Table of Contents
Advertisement
Using Smart Capture
Sending still images via e-mail
To send still images via e-mail, proceed as follows:
1
Click the Start button on the Windows
2
Point to Programs and click Smart Capture.
3
Click Still Viewer.
4
Select the still image you want to send via e-mail, using
5
Click Mail.
Your e-mail window appears with the selected file attached to your message.
6
Send the e-mail.
You need to set up MAPI when using the e-mail software.
Shooting video clips
You can use Smart Capture to capture video clips with a video camera connected to your computer, as well
as play them or send them via e-mail.
To capture video clips, proceed as follows:
1
Launch Smart Capture.
2
Select Movie using the Switch Capture Mode button.
The image appears in the Finder.
3
Turn the camera towards the subject.
4
Adjust the image.
5
Click the Capture button to shoot a video clip (you can shoot up to 60 seconds, according to the settings
you chose in the Recording options section).
6
Click the Capture button when finished.
The Movie Player window opens and the captured video clip appears in the Movie Player window.
®
taskbar.
or
n N
14
Advertisement
Table of Contents
