Table of Contents
Advertisement
Getting help
If there several computers communicate with the same Access Point, the concentration may be too high.
Wait a few minutes and try access again.
I cannot access the Internet
Check the settings of the Access Point. See the manual of the Access Point.
Check if your computer and the Access Point are communicating.
Make the distance between the Access Point and your machine smaller.
The maximum communication speed is not reached
The maximum communication speed is 11 Mbps, but it slows down when transferring MPEG2 data. The
normal speed is 4 to 5 Mbps.
The file transfer is interrupted
This can happen when the file size is too big.
You need to change temporarily a setting. After transferring the necessary files, you need to change the
setting back to its original state.
To change the setting, proceed as follows:
1
Click Start and then Control Panel.
2
Double-click the Network Connections icon.
3
Right-click the Wireless Network Connection icon and select Properties.
4
Select the Wireless Networks tab.
5
Deselect the Use Windows to configure my wireless network settings check box.
6
Click OK.
n N
79
Advertisement
Table of Contents
