Table of Contents
Advertisement
Getting help
6
Press the arrow keys to select System Time.
7
Set the time (hour:minute:second).
8
Press <Enter>.
9
Press the arrow keys to select the Exit menu.
10
Press the arrow keys to select Get Default Values and then press <Enter>. The Load default
configuration now? message appears.
11
Make sure that Yes is selected and then press <Enter>.
12
Press the arrow keys to select Exit (save changes) and then press <Enter>.
The Save configuration changes and exit now? message appears.
13
Make sure that Yes is selected and then press <Enter>.
My computer does not shut down
It is recommended that you shut down your computer using the Turn Off command on the Windows
menu. Using other methods, including those listed here, may result in loss of unsaved data.
If the Turn Off command does not work properly, proceed as follows:
Press <Ctrl>+<Alt>+<Delete>. If you have not changed the default settings, you will enter the Task
Manager, where you can close any application that cannot close normally, and restart your system.
If this does not work, press <Alt>+<F4> to get to the Turn off computer screen, from where you can
shut down or restart your computer.
If this does not work, press the power button and hold it for at least four seconds.
This turns off the power.
Unplug the computer from the AC adapter and remove the battery pack from your computer.
n N
76
®
Start
Advertisement
Table of Contents
