Sony VAIO PCG-VX71P User Manual

Hide thumbs Also See for VAIO PCG-VX71P:

Advertisement

Quick Links

N
Sony Notebook User Guide
P C G - V X 7 1 P

Advertisement

Table of Contents
loading

Summary of Contents for Sony VAIO PCG-VX71P

  • Page 1 Sony Notebook User Guide P C G - V X 7 1 P...
  • Page 2: Read This First

    Macrovision Corporation. Reverse engineering or disassembly is prohibited. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement.
  • Page 3 All other trademarks are trademarks of their respective owners. ® NERGY ® ® As an E Partner, Sony has determined that this product meets the E guidelines for energy efficiency. NERGY NERGY ® The International E Office Equipment Program is an international program that promotes energy saving through the use NERGY of computers and their office equipment.
  • Page 4: Safety Information

    Safety information Owner's record The serial number and model number are located on the bottom of your Sony notebook. Record the serial number in the space provided here. Refer to the model number and serial number if you call VAIO-Link.
  • Page 5 Read this first Magnets Magnetic bracelets. Audio/video Audio and picture distortion may occur if this equipment is positioned in close proximity to any equipment emitting electromagnetic radiation. Connectivity Never install modem or telephone wiring during a severe lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Be cautious when installing or modifying telephone lines.
  • Page 6: Regulatory Information

    Read this first Regulatory information Sony hereby declares that the PCG-VX71P product is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (radio equipment and telecommunications terminal equipment Directive). This product complies with EN 55022 Class B and EN 55024 for use in following areas: residential, commercial and light-industrial.
  • Page 7 Read this first Disposing of lithium ion batteries Do not handle damaged or leaking lithium ion batteries. Dispose of promptly and properly at end-of-life. Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
  • Page 8 Exceptional performance - Your PC includes a fast processor and an internal modem. Portability - The rechargeable battery pack provides hours of use without AC power. Sony audio and video quality - A high-resolution LCD screen enables you to take advantage of today’s advanced multimedia applications, games, and entertainment software.
  • Page 9: Documentation Pack

    A Modem Regulations flyer. Online documentation This Sony Notebook Hardware Guide: Using your notebook shows you how to use the standard components of your system. In this part of the manual you will also find out what you can do with a Memory Stick™ and how to use the Wireless LAN function.
  • Page 10 Welcome Refer to your Software Guide for information on the bundled software and the Sony applications. About the Software is a short description of the features of the software pre-installed on your system. Using Video software explains how to use Sony video software: DVgate, MovieShaker and Smart Capture.
  • Page 11 Welcome Your notebook and its accessories The following hardware items are in the box: Main unit Rechargeable battery pack Product recovery CD-ROMs Documentation pack If there are extra phone plugs in the box, see Using the correct phone plug AC adapter Power cord (country-specific) Phone cable (country-specific) i.LINK™...
  • Page 12: Ergonomic Considerations

    Welcome Ergonomic considerations You will be using your notebook as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations to both stationary and portable environments. Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, touchpad, or external mouse.
  • Page 13 Welcome Viewing angle of the computer’s display – Use the display’s tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness setting of the display as well. Lighting –...
  • Page 14: Table Of Contents

    Using your notebook Using your notebook This section describes how to start using your computer and how to use your computer’s internal and external devices. Locating controls and connectors Connecting a power source Starting your notebook Shutting down your notebook Using the keyboard Using the touchpad Using the Jog Dial™...
  • Page 15: Locating Controls And Connectors

    Using your notebook Locating controls and connectors Right Phone line connector (modem) (page 48) USB connector (page 64) Headphone connector (page 62) Line-in/microphone connector (page 63) Ventilation slot Cable lock slot* DC In (page 18) Do not cover the ventilation slot when your computer is on. * You can use the cable lock slot to lock down your notebook.
  • Page 16 Using your notebook Left Ethernet network connector (page 71) Monitor (VGA) connector (page 59) Wireless switch (page 52) S400 i.LINK™ connector (page 68) DC Out/VAIO peripheral (page 68) original connector USB connector (page 64) PC Card slot (page 38)
  • Page 17 Using your notebook Front Hard disk drive indicator (page 28) Num Lock indicator (page 28) Caps Lock indicator (page 28) Scroll Lock indicator (page 28) LCD screen (page 95) Power button (page 22) Keyboard (page 24) MagicGate Memory Stick™ (page 40) Power indicator (page 22) Battery indicator...
  • Page 18 Using your notebook Back Battery connector Bottom (page 19) Battery lock lever Battery release lever Memory module cover Reset switch (page 19) (page 19) (page 89)
  • Page 19: Connecting A Power Source

    Using your notebook Connecting a power source You can use either an AC adapter or a rechargeable battery pack as a power source. Using the AC adapter To use the AC adapter, proceed as follows: Plug the cable attached to the AC adapter (1) into the DC In connector (2) on the computer. Plug one end of the power cord (3) into the AC adapter.
  • Page 20: Using The Battery Pack

    Using your notebook Using the battery pack You can use a battery pack as a source of power. The battery pack supplied with your computer is not fully charged at the time of purchase. Inserting the battery pack To insert the battery, proceed as follows: Move the lock lever on the bottom of the computer to the Unlock position (1).
  • Page 21 Using your notebook Charging the battery pack To charge the battery pack, proceed as follows: Connect the AC adapter to the computer. Insert the battery pack. The computer automatically charges the battery (the battery indicator light flashes quickly as the battery charges).
  • Page 22 Using your notebook Removing the battery pack To remove the battery pack, proceed as follows: Turn off the computer and close the cover. Slide the lock lever (1) to the Unlock position. Slide the release lever (2) to the Unlock position and slide the battery away from the computer. You can remove the battery pack without turning off the computer when it is connected to the mains voltage (AC adapter).
  • Page 23: Starting Your Notebook

    Using your notebook Starting your notebook To start your computer, proceed as follows: Slide the LCD lock lever (1) in the direction of the arrow, and lift the cover. Press the power button (2) of the computer until the green power indicator (3) light turns If necessary, press <Fn>+<F5>...
  • Page 24: Shutting Down Your Notebook

    Using your notebook Shutting down your notebook It is important that you shut down your computer properly so as not to lose unsaved data. To shut down your computer, proceed as follows: Click the Start button. Click Turn Off Computer. The Turn off computer screen appears.
  • Page 25: Using The Keyboard

    Using your notebook Using the keyboard Your keyboard is very similar to a desktop computer’s, but the keyboard has additional keys that perform specific notebook-related tasks.
  • Page 26 Using your notebook Keys Escape key (1) Function keys (2) Print Screen key (3) Correction keys (4) Navigation keys (5) Application key (6) Numeric keypad area (7) Operator keys (8, 11, 12) ® Windows key (9) <Fn> key (10) Descriptions The <Esc>...
  • Page 27 Using your notebook Combinations and functions with the <Windows> key Combinations + F1 + <Tab> + <E> + <F> + <Ctrl> + <F> + <M> <Shift> + + <M> + <R> <Fn> + + <Insert> Functions ® Displays the Windows Help and Support Center.
  • Page 28 Using your notebook Combinations and functions with the <Fn> key Combinations/ Feature <Fn> + <Esc>: Standby <Fn> + (F3): speaker switch <Fn> + (F4): speaker volume <Fn> + (F5): brightness control <Fn> + (F7)*: switch to the external display <Fn> + (F12): Hibernate <Fn>...
  • Page 29 Using your notebook Indicators Indicator Power Battery Wireless LAN Memory Stick™ Light Hard disk Num Lock Caps Lock Scroll Lock Functions Power on: lights green. Standby mode: flashes umber. Hibernate mode: turns off. Indicates the status of the battery inserted in the computer.
  • Page 30: Using The Touchpad

    The keyboard contains a cursor-pointing device, your touchpad. You can point to, select, drag, and scroll objects on the screen using the built-in touchpad. If you prefer to use a mouse, you can disable the touchpad feature in the Sony Notebook Setup software. Action...
  • Page 31: Using The Jog Dial

    Using your notebook Using the Jog Dial™ Your computer is equipped with a Jog Dial™ (1) between the right and left touchpad buttons of your computer. You can turn (2) and press (3) the Jog Dial™ to scroll the window, select software, adjust the internal speaker volume, and so on.
  • Page 32 Using your notebook The Jog Dial™ window can always be displayed on the screen. This window has two modes: Launcher mode and Guide mode. The Jog Dial™ window is in Launcher mode until you start an application or the Jog Dial™ window becomes active. When an arrow appears next to an item in the Jog Dial™...
  • Page 33 To select another item, switch to Launcher mode and start again. Software supporting Jog Dial™ If the Sony software supporting the Jog Dial™ control is open, you can use Jog Dial™ control functions allocated to that software. Software not supporting Jog Dial™...
  • Page 34: Using The Cd-Rw/Dvd-Rom I.link™ Drive

    Using your notebook Using the CD-RW/DVD-ROM i.LINK™ drive You can use the external i.LINK™ drive to listen to audio CDs or use the recovery CDs, play DVDs and burn CDs. Setting up the drive The i.LINK™ drive is delivered with the following components: CD-RW/DVD-ROM drive VAIO peripheral cable Vertical installation base.
  • Page 35 Using your notebook Connecting the drive Next to your computer’s S400 i.LINK™ connector is a VAIO peripheral original connector. The i.LINK™ drive’s cable has a two-pin plug that has to be connected into both the S400 i.LINK™ connector and the VAIO peripheral original connector.
  • Page 36: Inserting A Disc

    Using your notebook Removing the drive To remove the drive, proceed as follows: Pull the two-pin end of the i.LINK™ drive’s cable from the notebook’s S400 i.LINK™ connector and the VAIO peripheral connector. Inserting a disc To insert a disc, proceed as follows: Turn on the computer.
  • Page 37 Using your notebook Using the DVD function To achieve optimum performance when playing DVD-ROM discs, you should follow these recommendations. You can play DVDs using the DVD-ROM drive and the WinDVD software. See the help file on the WinDVD software for details. Close all open applications before playing a DVD-ROM movie.
  • Page 38 Using your notebook The CD-R (CD-Recordable) disc is a data memory medium that can be used to write a program or other data, but once only. To achieve optimum performance when writing data on a CD-RW disc, follow these recommendations : To make a CD-R’s data readable on a CD-ROM drive, you need to close the session when you eject it.
  • Page 39: Using Pc Cards

    Gently push the card into the slot until the card is fixed into the connector. Some PC Cards may require you to disable idle devices when using the PC Card. You can use Sony Notebook Setup to disable devices. Be sure to use the most recent software driver provided by the PC Card manufacturer.
  • Page 40: Removing A Pc Card

    Using your notebook Removing a PC Card Follow the steps below to remove the PC Card while your computer is on. If it is not removed correctly, your system may not work properly. If you want to remove a PC Card when your computer is off, skip steps 1 to 6. To remove a PC Card, proceed as follows: Double-click the Safely Remove Hardware icon in the taskbar.
  • Page 41: Using The Memory Stick

    The generic Memory Stick™, coloured blue. The MagicGate Memory Stick™, coloured white. You can purchase Memory Sticks™ from the Sony Style website (http://www.sonystyle-europe.com), or from your local Sony dealer. Why Memory Stick™? Sony's vision is to expand the world of communication, promoting the portability of digital data. The Memory Stick™...
  • Page 42 Using your notebook The main advantages of the Memory Stick™ are its: Compactness: with dimensions of just 21.5 mm (W) x 2.8 mm (H) x 50 mm (D), compatible products can also be small, lightweight and attractive in their design. Capacity: Its data capacity far exceeds that of a floppy disk.
  • Page 43 Using your notebook Generic Memory Stick™ The original Memory Stick™, blue in colour, can be used to record image data taken with digital still cameras, etc. or data from the PC. With it, you can record, play back and transfer various kinds of data at any given time.
  • Page 44 MagicGate is a copyright protection technology that complies with the standards set by SDMI (Secure Digital Music Initiative, an organization working to draw up industry standard specifications in order to protect copyrights of digital music). logo indicates the copyright protection system devised by Sony. It is not meant to guarantee compatibility with other media.
  • Page 45 (SDMI) to study technology for protecting copyrights during the electronic distribution of music. Sony offers the MagicGate Memory Stick™ and Memory Stick™ Walkman with a copyright protection function that complies with SDMI standards, thereby providing an environment where individuals can record and enjoy third-party music data without worrying about copyright infringement.
  • Page 46 There are nearly 80 Memory Stick™-enabled products on the market or announced for introduction world- wide, ranging from camcorders and portable music players to voice recorders and many other electronic devices. You can currently use Memory Sticks™ with the following Sony products: Visual: Cybershot digital camera...
  • Page 47 Using your notebook Write-protecting a Memory Stick™ Memory Sticks™ are designed with an erasure prevention switch to protect valuable data from accidental erasure or overwriting. Move the tab to the right or left* to set or release write-protection. When the erasure prevention switch is off, data can be saved on the Memory Stick™.
  • Page 48: Removing A Memory Stick

    Using your notebook To avoid damaging the computer or the Memory Stick™, do not force the Memory Stick™ into the slot if it does not insert smoothly. Removing a Memory Stick™ To remove a Memory Stick™ using the Memory Stick™ slot, proceed as follows: Check that the access light is off.
  • Page 49: Using The Modem

    Using your notebook Using the modem Your notebook is equipped with an internal modem. You need to connect to a phone line not only to take advantage of online services and the Internet, but also to register your computer and software online, and to contact VAIO-Link. To connect a phone line, proceed as follows: Plug one end of the phone cable (1) into the phone line jack on the computer.
  • Page 50 Using your notebook Using the correct phone plug If there are two phone plugs in the box, make sure you use the correct one for the country you are in, as follows: UK: The connector can be identified by its cuboid shape and flat pins.
  • Page 51: Using Power Saving Modes

    Using your notebook Using power saving modes When you use a battery as the source of power for your computer, you can take advantage of power management settings to conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate.
  • Page 52: Using Hibernate Mode

    Using your notebook Using Hibernate mode The state of the system is saved on the hard disk and power is turned off. The power indicator light is off in this mode. To activate Hibernate mode, proceed as follows: Press <Fn>+<F12>. The Save to Disk Manager screen appears and the notebooks enters Hibernate mode.
  • Page 53: Using Wireless Lan

    The Sony WLAN supports all normal Ethernet activities, but with the added benefits of mobility and roaming. You can still access information, Internet/intranet and network resources, even in the middle of a meeting, or as you move from one place to another.
  • Page 54 Using your notebook Communicating without an Access Point (ad-hoc) An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other central controller or Access Point. Each device communicates directly with other devices in the network.
  • Page 55 Using your notebook Fill in the Network key*. The network key should be 5 digits. You can choose whatever you want. Click OK. Your Network name appears in the Preferred networks box. Click Advanced. The Advanced dialog box appears. Select the Computer-to-computer (ad hoc) networks only check box.
  • Page 56 An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an Access Point, for example the Sony PCWA-A200 Access Point. The Access Point bridges wireless and wired LANs and acts as a central controller for the Wireless LAN. The Access Point coordinates...
  • Page 57 Using your notebook To communicate with an Access Point (infrastructure), proceed as follows: Turn on the Wireless switch on the left side of the computer. Right-click the network icon Click View Available Wireless Networks. The Connect to Wireless Network dialog box appears. Select the network you want to use.
  • Page 58 When you change the channel number on one computer, you need to change the channel number manually on all other devices intended for wireless connection. If you are using a non-Sony Access Point, read the manual of the Access Point to be sure which channel to use. For more information on Wireless LAN, read the Wireless LAN Regulations flyer.
  • Page 59: Connecting Peripheral Devices

    Connecting peripheral devices Connecting peripheral devices You can add functionality to your computer by connecting or using any of these peripherals. Before you connect peripherals, turn off the computer and all peripherals. Connect the power cord only after connecting all cables. Turn on the computer only after turning on all peripherals.
  • Page 60: Connecting An External Display

    Connecting peripheral devices Connecting an external display You can connect an external display to your notebook. For example, you can use your computer with the following devices: Computer display (monitor) Projector Turn off your computer and the peripherals, unplug the AC adapter and the power cord before connecting the external display. Connect the power cord after connecting all other cables.
  • Page 61 Connecting peripheral devices Connecting a computer display You can connect a computer display directly to your notebook. You may not be able to display the computer's LCD and the external display together, depending on the type of computer display and projector used. When you connect an external display to the monitor connector, you can press <Fn>+<F7>...
  • Page 62 Connecting peripheral devices Connecting a projector You can use a projector as an external display, such as the Sony LCD Projector. To connect a projector, proceed as follows: Use the VGA cable to connect the projector to the notebook's VGA connector (1).
  • Page 63: Connecting External Speakers

    Connecting peripheral devices Connecting external speakers You can enhance the sound quality of your computer by connecting external speakers. To connect external speakers, plug the speaker cable into the headphone connector identified by the symbol. Turn down the volume of the speakers before you turn them on. Make sure your speakers are designed for computer use.
  • Page 64: Connecting An External Microphone

    Connecting peripheral devices Connecting an external microphone To connect an external microphone to your notebook, proceed as follows: Plug the microphone cable (1) into the microphone connector (2) identified by the symbol. Make sure your microphone is designed for computer use.
  • Page 65 Plug the USB mouse cable into one of the USB connectors identified by the You can connect the optional Sony USB mouse (PCGA-UMS1 series). As the driver for this mouse is preinstalled on your computer, you can use the mouse by just connecting it.
  • Page 66 Connecting peripheral devices Connecting a USB floppy disk drive You can connect a floppy disk drive to one of the two USB connectors on your computer. Connecting the floppy disk drive To connect the floppy disk drive, proceed as follows: Plug the floppy disk drive cable into one of the USB connectors identified by the symbol.
  • Page 67 Connecting peripheral devices Inserting a floppy disk To insert a floppy disk, proceed as follows: Hold the disk (1) with the label side facing up. Gently push the disk into the drive (2) until it clicks into place. Removing a floppy disk To remove a floppy disk, proceed as follows: When you finish using the disk, wait until the LED indicator (1) turns off and then press the eject button (2) to remove the disk.
  • Page 68: Connecting A Usb Printer

    Connecting peripheral devices Removing the floppy disk drive To remove the floppy disk drive, proceed as follows: If your computer is on, wait until the LED indicator turns off and then unplug the USB cable from the computer. If the floppy disk drive is not removed properly, your system may crash and you may lose data that you did not save before.
  • Page 69 Connecting peripheral devices Connecting an i.LINK™ device Your computer includes an i.LINK™ (IEEE1394) connector, which you can use to connect to an i.LINK™ device such as the supplied CD-RW/DVD-ROM drive (see Using the CD-RW/DVD-ROM i.LINK™ drive a digital video camera recorder, or another VAIO notebook in order to copy, delete or edit files. The i.LINK™...
  • Page 70: Connecting A Digital Video Camera Recorder

    On Sony digital video cameras, connectors labelled DV Out, DV In/Out or i.LINK™ are i.LINK™-compatible. The Sony digital video camera recorder is an example; your digital video camera recorder may need to be connected differently. If your digital video camera recorder includes a Memory Stick™...
  • Page 71 Connecting peripheral devices Connecting two VAIO notebooks You can copy, edit or delete files on another VAIO computer to your computer with an optional i.LINK™ ® cable. If the second computer has the Windows XP operating system, you just need the i.LINK™ cable. If ®...
  • Page 72: Connecting To A Network (Lan)

    Connecting peripheral devices Connecting to a network (LAN) Without using the Wireless LAN function, you can connect your notebook to 10BASE-T/100BASE-TX-type networks via an Ethernet network cable. For the detailed settings and devices needed to connect to the network, consult your Network Administrator. To connect your notebook to a LAN, proceed as follows: Connect the network cable to the Ethernet network connector on the notebook.
  • Page 73: Getting Help

    Getting help Getting help This section describes how to get help and support from Sony, as well as troubleshooting tips for your computer. Sony support options Sony provides several support options for your computer. Printed documentation supplied with your notebook...
  • Page 74 Precautions provides facts and advice about using your notebook. Glossary refers to terms used in this manual. Refer to your Software Guide for information on the bundled software and the Sony applications. About the Software is a short description of the features of the software pre-installed on your system.
  • Page 75: Other Sources Of Information

    Getting help Other sources of information The Online help files that accompany your pre-installed software contain instructions on using the software. VAIO-Link website: if you have any problem with your computer, you can access the VAIO-Link web site. Go to: http://www.vaio-link.com VAIO-Link Response Centre: Before contacting VAIO-Link Response Centre, try to solve the problem by reading these User Guides and help files for the peripherals or software.
  • Page 76: About The Computer And Software

    If the floppy disk drive is empty, proceed as follows to initialize the BIOS: Turn off the computer. Remove any peripheral devices connected to the computer. Turn on the computer and press <F2> when the Sony logo appears. The BIOS setup menu screen appears. Set the date (month/day/year).
  • Page 77 Getting help Press the arrow keys to select System Time. Set the time (hour:minute:second). Press <Enter>. Press the arrow keys to select the Exit menu. Press the arrow keys to select Get Default Values and then press <Enter>. The Load default configuration now? message appears.
  • Page 78 One of the buttons is assigned to the double-click action. My mouse does not work Check that the USB mouse is plugged correctly into one of the USB connectors. If you are using an optional Sony USB mouse, check that the appropriate driver and mouse-ware are properly installed. ®...
  • Page 79: About Wireless Lan

    Getting help About Wireless LAN I cannot use the Wireless LAN function Check if the Wireless switch on the left side of the machine is turned on. Check if you have selected Wireless LAN in the Switch wireless devices dialog box. The Wireless LAN Access Point and your computer cannot communicate Check the solutions in I cannot use the Wireless LAN function.
  • Page 80 Getting help If there several computers communicate with the same Access Point, the concentration may be too high. Wait a few minutes and try access again. I cannot access the Internet Check the settings of the Access Point. See the manual of the Access Point. Check if your computer and the Access Point are communicating.
  • Page 81: About The Display

    Getting help About the display My LCD does not display anything Check that the computer is plugged into a power source and that it is turned on. Check that the power indicator on the front panel of the computer is on. Check that the battery packs are inserted properly and that they are charged.
  • Page 82 Getting help Clean the disc with an appropriate cleaner. Moisture condensation may have occurred. Do not use the computer for at least 1 hour before turning it on. I cannot play a DVD-ROM If a region code warning appears when you are using the DVD player, it could be that the DVD-ROM you are trying to play is incompatible with the DVD-ROM drive on your notebook.
  • Page 83 Getting help If you want to use other media and are having difficulty formatting non-4x CD-RW discs, change the writing speed from 4x to a lower setting. To change the writing speed from the default to a lower speed, proceed as follows: Go to My Computer from the Start menu.
  • Page 84 Getting help If the tray does not come out when you press the eject button, go to My Computer. Select the drive, click the right button of your mouse and select Eject. If this does not work, you can open the tray by inserting a sharp, pointed object into the hole next to the eject button.
  • Page 85: About Sound

    Getting help Select the Hardware tab, then click Device Manager. Select Universal Serial Bus controllers, then Y-E Data USB Floppy. From the Action menu, click Uninstall. Keep clicking OK until the Confirmation of deletion of device message appears. Select Scan for hardware changes from the Action menu. The UFD5 is recognized as drive A.
  • Page 86: About The Modem

    Getting help My microphone does not work Check that the microphone is plugged into the microphone connector correctly. About the modem My internal modem does not work Check that the phone line is plugged into your computer. Check that the phone line is working. You can check the line by plugging in an ordinary phone and listening for a dial tone.
  • Page 87: About Peripherals

    Use manual import/export in DVGate motion if problems occur with third party cameras. You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with the i.LINK™ devices.
  • Page 88: About Digital Video Captures And Dvgate

    Getting help About digital video captures and DVgate While I am recording images to a digital video device using DVgate, my system displays the message 'Recording to DV device failed. Check the power and cable connections to the DV device and try the operation again...' Close all open applications and restart your computer.
  • Page 89: Adding And Removing Memory

    Precautions Precautions This section describes safety guidelines and precautions to help you protect your computer from potential damage. Your notebook and memory modules use high precision components and electronic connectors technology. To avoid the invalidation of your guarantee by mishandling, it is recommended that: You contact your dealer to install a new memory module.
  • Page 90: Removing A Memory Module

    Precautions Disconnect the system from its power source and from any telecommunication links, networks, or modems before you open the system. Failure to do so may result in personal injury or equipment damage. Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory module only at an ESD workstation.
  • Page 91 Precautions Slide the LCD lock lever and lift the cover. Slide the keyboard toward the LCD display, then lift it away slightly. Lift the keyboard from the LCD display side. Gently turn it over the touchpad. Be careful not to detach the cable when lifting the keyboard. Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity.
  • Page 92 Precautions Pull the tabs in the direction of the arrows. The memory module is released. Pull the memory module out in the direction of the arrow. Gently replace the keyboard, then press it into your computer. Be careful not to detach the cable when lifting the keyboard.
  • Page 93 Precautions Slide the LCD lock lever and lift the cover. Slide the keyboard toward the LCD display, then lift it away slightly. Lift the keyboard from the LCD display side, then gently turn it over the touchpad. Be careful not to detach the cable when lifting the keyboard. Remove the existing memory module.
  • Page 94 Precautions Slide the memory module into the slot. Depending on the configuration of your notebook, the number of available slots can vary. Snap the connectors into place when the board is correctly seated. Gently replace the keyboard, then press it into your computer. Be careful not to detach the cable when lifting the keyboard.
  • Page 95 To view the amount of memory, proceed as follows: Turn on the computer. Go to Sony Notebook Setup via the Start menu. The Sony Notebook Setup dialog box appears. In the About this Computer tab you can view the amount of system memory. If the additional memory...
  • Page 96: Other Precautions

    Precautions Other precautions On handling the hard disk The hard disk has a high storage density and reads or writes data in a short time. On the other hand, it may be easily damaged by mechanical vibration, shock or dust. Although the hard disk has the safety device in itself to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling your computer.
  • Page 97 Precautions The screen becomes warm during operation. This is normal and does not indicate a malfunction. The LCD is manufactured using high-precision technology. You may, however, see tiny black points and/ or bright points (red, blue, or green) that continuously appear on the LCD. This is a normal result of the manufacturing process and does not indicate a malfunction.
  • Page 98 Precautions Heat sources, such as radiators or air ducts, Direct sunlight, Excessive dust, Moisture or rain, Mechanical vibration or shock, Strong magnets or speakers that are not magnetically shielded, Ambient temperature of more than 35ºC or less than 10ºC, High humidity. Do not place electronic equipment near your computer.
  • Page 99 Precautions On handling floppy disks Do not open the shutter manually or touch the surface of the floppy disk. Keep floppy disks away from magnets. Keep floppy disks away from direct sunlight and other sources of heat. On handling CD-ROMs Do not touch the surface of the disc.
  • Page 100 Precautions On using the battery pack Never leave the battery pack in temperatures above 60 C, such as in a car parked in the sun or under direct sunlight. Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures.
  • Page 101 Precautions Preventing hearing damage – Avoid using headphones at high volume. Hearing-experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use. On handling the Memory Stick™ Do not touch the Memory Stick™ connector with your finger or metallic objects. Use only the label supplied with the Memory Stick™...
  • Page 102 Glossary Glossary This section refers to terms used in this manual. These terms and definitions have been compiled to provide you with a better understanding of your VAIO computer. Term <F1> key 10BASE-T/100BASE-TX ACPI Application recovery Application recovery CD-ROM BIOS CardBus CD-ROM Definition...
  • Page 103 The EULA can be found in the Read this first section at the beginning of the software guide or directly on the VAIO desktop. i.LINK™ is Sony’s version of the IEEE 1394 standard for high-speed digital serial interface. The standard is regarded in the audio/video and IT industries as the most suitable interface for connecting computers and digital audio/video devices (such as digital cameras etc.).
  • Page 104 Glossary L2 cache memory Lithium-ion battery MAPI maximum RAM Motherboard Cache memory is RAM-like memory that enables quick access to data that has already been read by the computer. L1 and L2 are levels of cache memory in a computer. A LAN (Local Area Network) is a group of computers connected together within a limited geographical area.
  • Page 105 Glossary MPEG Operating system Partition PC Card PCMCIA Pixel Port replicator MPEG or Moving Pictures Experts Group is a standard for audio-visual compression of video sequences. MPEG achieves high compression rates by storing only the changes from one frame to another. The decrease in data is generally imperceptible to the human eye. MPEG-1 was developed for digital storage of video and audio data on CD-ROM.
  • Page 106 Glossary Processor Product recovery CD-ROM PS/2 PSTN Resolution RGB signal cable SDRAM Standard RAM System recovery System recovery CD-ROM The processor is the brains of the computer; it processes the instructions of your system’s programs. The processor is also known as the CPU or microprocessor and can be found on the motherboard (see this word) of your computer.
  • Page 107 You can connect up to 127 devices to a USB port. The USB standard is Hot Plug and Play. Short for Video Audio Integrated Operation. Brand name covering Sony's PC products, peripherals, accessories and software. VAIO-branded items are all designed to make the best use of Sony's Audio-Video (AV) and Information Technology (IT) skills.

Table of Contents