Table of Contents
Advertisement
Connecting peripheral devices
Connecting a Universal Serial Bus (USB) device
You can connect a USB device (e.g. mouse, floppy disk drive...) to your computer.
You do not need to shut down the computer before connecting or disconnecting a USB peripheral.
When you start your notebook with a USB hub connected to it, make sure that a device is connected to the
USB hub. If you encounter problems booting when a USB hub is connected to your notebook, unplug the
hub and reboot.
Connecting a USB mouse
To connect a USB mouse, proceed as follows:
Plug the USB mouse cable (1) into the USB connector (2) identified by the
symbol.
✍
You can connect the optional Sony USB mouse
(PCGA-UMS1 series). As the driver for this mouse is
preinstalled on your computer, you can use the mouse by
just connecting it.
n N
66
Advertisement
Table of Contents
