Connecting A Universal Serial Bus (Usb) Device; Connecting A Usb Mouse - Sony VAIO PCG-Z600HEK User Manual

Connecting peripheral devices

Connecting a Universal Serial Bus (USB) device

You can connect a USB device (e.g. mouse, floppy disk drive...) to your computer.
You do not need to shut down the computer before connecting or disconnecting a USB peripheral.
When you start your notebook with a USB hub connected to it, make sure that a device is connected to the
USB hub. If you encounter problems booting when a USB hub is connected to your notebook, unplug the
hub and reboot.

Connecting a USB mouse

To connect a USB mouse, proceed as follows:
Plug the USB cable (2) into the USB connector (1) identified by the


You can connect the optional Sony USB mouse (PCGA-UMS1). As the driver for this mouse is preinstalled on your computer, you can use the mouse
by just connecting it.
To use the USB floppy disk drive and the USB mouse at the same time, plug the USB device to the mini USB connector of the computer by using the
supplied conversion adapter.
symbol.
n N
50