Table of Contents
Advertisement
Using Video software
3
Select the Capture frames continuously option button to capture in Continuous Capture mode.
Clear the Capture frames continuously option button to capture in Single Frame Capture mode.
To capture pictures, proceed as follows:
1
Connect the DV device to your computer.
2
Launch DVgate Still (Start/All Programs/DVgate/DVgate Still).
The DVgate Still window appears.
3
Set the DV device to the Play or Pause mode.
The video image appears in the Monitor window.
4
Click the Capture button.
The video image in the Monitor window is being captured.
✍
Dragging the slider in the Capture window to the left or right lets you display the still picture before or after the current one.
n N
26
Advertisement
Table of Contents
