Table of Contents
Advertisement
Using Video software
✍
All newly added files are appended to the end of the list.
You can drag multiple files at one time; however, the order in which they are added is unpredictable.
You can record AVI files with different sound modes on a DV device, but about one second of no sound (depending on the DV device) may occur at
the point where the sound modes change.
You can only add AVI files using DV Codec as video compression; MPEG files are not supported.
When recording a video sequence, make sure that all images are saved in the same mode. Recording in different modes might cause sound or image
distortions during playback. After adding the files you want to the Record List, you can still change the order of the files, add or delete files.
After adding the files to the Record List, you can still change the order of the files, add or delete files.
To change the order of the files in the Record List, proceed as follows:
1
Click the file you want to move while holding down the mouse button.
2
Drag the file to the appropriate position and then release the mouse button.
To remove a file from the Record List, proceed as follows:
1
Click the file you want to remove.
2
Click Delete.
The removed file is filled by the subsequent file and the files are renumbered.
Click Delete All when to remove all files.
✍
You can select multiple AVI or still picture files from the Record List by clicking them while holding down the <Shift> or <Ctrl> key.
When you move multiple files, they are all moved together.
You can undo changes by choosing Undo from the Edit menu immediately after inserting, moving or deleting (a) file(s).
You can save a Record List for future use. Record List files can only be used in DVgate Motion.
To preview a clip, proceed as follows:
1
Select the file you want to preview in the DVgate Motion – AVI file list window.
n N
22
Advertisement
Table of Contents
