Table of Contents
Advertisement
Using Video software
Adjusting the recording correction values
To ensure accuracy in the recording, you can specify recording correction values. Adjustment of the
recording correction values is especially important when performing splice recording. You can choose to
specify the values yourself or to have them automatically adjusted by using the automatic calibration
feature. The values generated by the automatic calibration feature are usually correct.
To automatically adjust the recording correction values, proceed as follows:
1
Launch DVgate Motion.
2
Click the down arrow and select Export - Auto from the Mode drop-down list.
3
Select Adjust on Recording... from the Settings menu.
The Adjust on Recording dialog box appears.
4
Click the AutoAdjust button.
DVgate Motion activates the connected DV device and automatically finds the adjustment values.
5
Click OK.
✍
To manually adjust the recording correction values, refer to the DVgate online help file.
Adding files to the Record List
To add files to the Record List, proceed as follows:
1
Launch DVgate Motion.
2
Click Add in the DVgate Motion – AVI file list.
The Add dialog box appears.
3
Select a file and click Open.
The specified file is added and the serial number, first and last images, time code, file length and file
name are displayed.
★
DVgate Motion adds all serial numbered files with the same name if you select Add all divided files saved with the same name. Serial numbered
files are created when you specify to save files as multiple files in DVgate Motion and DVgate Assemble.
n N
21
Advertisement
Table of Contents
