Advertisement
Quick Links
John Lewis
Double
Thank you for purchasing this Portman Bedstead. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
PRE-ASSEMBLY PREPARATION
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any compon ents are missing, please contact the John Lewis Helpline.
Heavy
This product is
WHEN LIFTING
to avoid personal injury and (or) damage to the product.
This product takes approximately
The fittings pack contains
CHILDREN
.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product plase call the John Lewis
Helpline on 01244 689949 or e-mail mail@fwgroup-uk.com
Portman Bedstead
, it should be assembled as near as possible to the point of use.
40 MINUTES
SMALL PARTS
For product support or spare parts please call
the John Lewis Helpline;
2 PEOPLE
to assemble with
KEPT AWAY FROM YOUNG
which should be
1/5
Stock number: 810/84202, 810/84203
T: 01244 689949
E: mail@fwgroup-uk.com
TAKE CARE
.
Advertisement
Related Manuals for John Lewis Portman Bedstead
Summary of Contents for John Lewis Portman Bedstead
- Page 1 Please ensure instructions are read in full before attempting to assemble this product Necessary Tools Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any compon ents are missing, please contact the John Lewis Helpline. Heavy TAKE CARE This product is , it should be assembled as near as possible to the point of use.
- Page 3 Step by step assembly instructions Step One Attach the Side Rails (3) to the Head Board (1) and Foot Board (2) using Washer (A) and Bolt M6 x 25mm (B). Tighten using Allen Key (J) as shown in the diagram below. Step Two Place the Tubing Slats (5) onto the Side Rails (3) and secure using bolt M6 x 30mm (C) M6 (E) As shown in the diagram below.
- Page 4 Step Three Ensuring the holes along the centre rail (7) are facing upwards, attach to the underside of Tubing Slats (5) using M6 x 35mm Bolt (D) and M6 Nut (E). Screw the adjuster (F) fully into the bottom of the supporting legs (6). Attach the supporting legs (6) into the pre - drilled holes on the under side of the centre rail (7) using M6 x 35mm Bolt (D) and M6 lock nut (I).
-
Page 5: Care And Maintenance
It is recommended that before moving heavy objects to a new location they are completely dis-assembled If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or e-mail mail@fwgroup-uk.com.