Using Your Notebook Computer
n N
44
Using Infrared Communication Devices
Check the Status tag of the
Infrared Monitor in the Windows
Control Panel to determine if the
infrared device has been detected.
If the two devices are too far
apart or too close together, data
transfer may be interrupted or
there may be noise in the
transmission.
15°
Do not cover the infrared ports
Infrared port
with your hand or any other
objects.
Avoid direct sunlight, fluorescent
light, or flashing incandescent
light near the infrared ports.
See the manual that came with
your digital still camera or other
infrared communication device for
more information on installation
and use.
The active area of infrared
transmission extends about 1m
(39
/
inches) with a radius of 15
3
8
degrees.