Table of Contents
Advertisement
Connecting peripheral devices
Connecting a computer display
You can connect a computer display (monitor) either directly to your notebook or via the (optional) port
replicator.
To connect a computer display, proceed as follows:
1
Plug the display cable (1) (not supplied) into the monitor/VGA connector (2)
2
If necessary, plug one end of the display's power cord (3) into the display, and the other end into an AC
outlet.
You cannot use the monitor connector on your notebook when the port replicator is connected to the notebook.
n N
61
on the notebook.
Advertisement
Table of Contents
