Table of Contents
Advertisement
Connecting peripheral devices
4
Close the tilt stands before attaching the notebook to the port replicator.
5
Align the bottom connector of the notebook with the connector on the port replicator (6) and push
down until it clicks into place.
6
Turn on the notebook.
When you use the port replicator for the first time, the installation of the network drivers starts automatically.
When attaching your computer to the port replicator, do not attempt to insert or remove the battery pack. Lifting and turning the computer with the
attached port replicator may cause a temporary loss of power.
Use the AC adapter that comes with your notebook or the optional Sony adapter.
n N
58
Advertisement
Table of Contents
