Malfunction Of The Bar Code Reader - JUKI AP-876 Instruction Manual

7. Malfunction of the bar code reader

When the bar code reader does not work, push the SCAN button on the side of the bar code reader to
check if there is laser emission or not.
If there is no laser emission even if the SCAN button is pushed, the bar code reader may be defective.
If the laser is emitted, read the following bar codes in the order of 1 → 2 → 3 , and restart the sewing
machine.
1
Z Z
2
U 2
3
Z Z
Start of setting
Initialization
End of setting
– 6 –