Installation Procedure - JUKI AP-876 Instruction Manual

CAUTION :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.

1. Installation procedure

4
23
5
7
1
6
CN50 9P White
8
– 1 –
Install the bar code reader 1 onto the
1)
mounting plate 4 using the screws 2 and the
washers 3 (two locations) which are included
as the accessories.
2) Fix the mounting plate on temporary stop
switch 5 with setscrews 6 supplied with the
mounting plate as accessories.
3) Open the electrical box, and connect the relay
cable 8 to CN50 7 of the main PCB.