Table of Contents
Advertisement
Getting help
5
Press Enter.
6
Press the arrow keys to select System Time.
7
Set the time (hour:minute:second).
8
Press Enter.
9
Press the arrow keys to select the Exit menu.
10
Press the arrow keys to select Get Default Values and then press <Enter>. The message Load default
configuration now? appears.
11
Make sure that Yes is selected and then press <Enter>.
12
Press the arrow keys to select Exit (save changes) and then press <Enter>.
The Save configuration changes and exit now? message appears.
13
Make sure that Yes is selected and then press <Enter>.
My computer does not shut down
You are recommended to shut down your computer using the Shut Down command on the
Windows
If the Shut Down command does not work properly, proceed as follows:
❑
Restart the computer by pressing <Ctrl>+<Alt>+<Delete> to enter the Windows Security feature to
close any application that can not close normally, and restart your system.
❑
If this does not work, press the power button and hold it for at least four seconds.
This turns off the power.
❑
Unplug the computer from the AC adapter and remove the battery pack from your computer.
®
Start menu. Using other methods, including those listed here, may result in loss of unsaved data.
n N
90
Advertisement
Table of Contents
