Table of Contents
Advertisement
Connecting peripheral devices
Attaching your computer to the port replicator
To attach your computer to the port replicator, proceed as follows:
1
Disconnect all peripherals from the computer.
2
Plug the cable attached to the AC adapter (1) into the DC In port (2) on the port replicator (3).
3
Plug the power cord (4) into the AC adapter and an AC outlet.
The power indicator DC IN (5) of the port replicator turns green.
4
Close the tilt stands before attaching the notebook to the port replicator.
5
Align the bottom connector of the notebook with the connector on the port replicator (6) and push
down until it clicks into place.
n N
66
Advertisement
Table of Contents
