Table of Contents
Advertisement
Connecting peripheral devices
Connecting a TV
You can connect a TV to the notebook or to the optional port replicator.
To connect a TV to the notebook, proceed as follows:
1
Plug one end of the audio/video cable (1) (optional) into the AV Out connector (2) (yellow) and the other
end into the TV.
2
Plug the power cord of the TV (3) into an AC outlet.
3
Switch the input channel of the TV to external input.
4
Set up the TV configuration system.
If the display resolution of your computer is more than 800 x 600 pixels, a part of the image cannot be displayed on your TV. The hidden area on your
TV can be seen by moving the cursor on your computer. If you want to display the full image, change the display resolution of your computer to any
resolution up to 1024 x 768 pixels.
✍
See the manual supplied with your peripheral for
more information on installation and use.
If you insert a DVD in your DVD-ROM drive to watch
a video on your TV, the <Fn>+<F8> key combination
might not activate the function to toggle between
your LCD and TV.
Solution:
1. Eject your DVD from your computer.
2. Once the DVD is ejected, toggle between your LCD
and your TV with the combination <Fn>+<F8>.
Your image displays now on both LCD and TV. Re-
insert your DVD to launch your DVD software.
n N
72
Advertisement
Table of Contents
