Page 1
Order of assembly Please follow the safety instructions attached to the furniture. It is recommended to install the METOD bodies to the wall using the anchor brackets supplied with the IKEA cabinet, especially in the case of high- quality fronts.
Page 2
Assembly instructions METOD njufront.pl Before mounting, make sure that the Side panel assembly surfaces of the elements are clean and free from contamination. Position the body of the furniture so that the rear wall is on the ground. Using one...
Page 3
Assembly instructions METOD njufront.pl Side panel assembly Secure the panel with screws by placing them on the inside of the body. For fixing screws for side panels, you can use the holes under the shelves. When screwing the screws, press the panel to the body with your hand.
Page 4
Assembly instructions METOD njufront.pl During assembly Before assembly, the surfaces of the elements should be cleaned with a soft, damp microfiber or cotton cloth. When assembling panels and fronts, avoid shocks with hard or sharp objects that may permanently damage the surface of the varnish.