Sony Vaio PCG-745 User Manual page 54

4
Close the cover of the battery charger bay.
The battery charger indicator is a reference for the battery charge. To check the accurate
charging amount, insert the charged battery in the computer and use BatteryScope (See
"Displaying Battery Information" on page 68.).
To insert the CD-ROM or floppy disk drive into the docking station
You can use the CD-ROM drive or the floppy disk drive in the docking
station. By using the multi purpose bays in both the computer and the
docking station, you can use the CD-ROM drive and the floppy disk
drive at the same time.
Turn off the computer before inserting or removing the drive.
To remove the drive
There is an Eject lever on the bottom of the drive. Slide the lever in the
direction of the arrow, and then pull the drive out of the bay. Insert
another drive or the weight saver into the multi purpose bay. See "Using
the Weight Saver" on page 40. Do not leave the multi purpose bay empty.
To remove your computer from the docking station when the power is on
1
Check that the charged battery is inserted in the computer.
2
On the Start menu, select Eject. Alternatively, press Fn+F9.
The indicator turns off. If you press Fn+F9, the computer beeps.
Do not remove the computer before the
computer before the light turns off may cause malfunction.
Connecting Peripheral Devices
Multi purpose bay
CD-ROM drive
Floppy disk drive
indicator light turns off. Removing the
IN USE
49