Toshiba 40XV733 Adjustment page 23

ADJUSTMENT [LCD Color Television] ASIA_EU
Never turn off the power while upgrading.
6. When the upgrade is completed, the following message is displayed.
7. Disconnect the USB device.
8. The TV set is automatically turned off and then on.
9. After the TV is turned on, perform Factory Reset (select "Reset TV" in the Setup
Menu). Then select "Yes" to confirm reset.
DTV Software - from Boot Up
1. Extract the upgraded file onto a USB device.
2. Unplug the TV from the AC outlet.
3. Connect the USB device to the USB slot on the side panel.
4. Press and hold the INPUT button on the TV.
5. While holding the INPUT button, plug the TV in the AC outlet and watch the LEDs on
the front of the TV.
a. After several seconds, the orange PowerOn/Standby LED and the green OnTimer
LED light is on, indicating that the TV is being upgraded.
b. Once the upgrade started, release the menu button.
file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB...
Стр. 22 из 23
06.05.2015