Heat & Glo 6000G Installation Instructions page 3

8. To unlock the doors and make them operable.
When the front door panel is off the fi replace, locate the
locking bar bolted under two acorn nuts. Remove one of the
acorn nuts and rotate the locking bar to a vertical position.
Replace the acorn nut. Hook the front door panel on the
fi replace following the above steps.
FRONT
DOOR
PANEL
Figure 3.
Cleaning Instructions for Doors
Use a microfi ber cloth and Windex® Original Glass
Cleaner or 03M003 Stove Bright® Glass Cleaner to clean
the door immediately after installation to remove acids
deposited by the installer or technician. Spray the cleaner
onto the microfi ber cloth and carefully wipe the entire
surface. The door should be cleaned in this manner
annually by the homeowner to remove fi ngerprints or
other contaminants. Once oxidation of the paint pigment
has occurred, cleaning will not restore the original color.
3
BOLTS (4)
VALVE
SHIELD
BACK
FIREPLACE
DOOR
SURROUND
PANEL
Heat & Glo • Arcadia, Chateau, Valencia Doors • 2101-931 Rev. E • 5/11
LOWER
VALVE
SHIELD
Please contact your Heat & Glo dealer with any
For the location of your nearest Heat & Glo dealer,
Heat & Glo, a brand of Hearth & Home Technologies Inc.
7571 215th Street West, Lakeville, MN 55044
questions or concerns.
please visit www.heatnglo.com.
www.heatnglo.com