Checking Of The New Software
1. Turn off and on the TV.
2. Enter the "Setup" submenu in the "DTV Menu".
3. Choose the "Configuration" option.
4. For controlling new software, check the "Receiver Upgrade" option.
1.4.
17MB38 Digital Software Update From USB
Software upgrade is possible via USB disk by folowing the steps below.
1. Copy the bin file, including higher version than the software loaded in flash, into the
USB flash memory root directory. This file should be named force_upgrade.bin .
2. Insert the USB disk.
3. Digital module performs version and CRC check. If version and CRC check is
successful, then a message prompt appears to notify user about new version. If the
user confirms loading of new version, upgrade.bin file is written into flash unused
slot.
4. Digital module disables the previous software in the flash and then a system reset
is performed.
5. After the reset, digital module starts with new software.