4
Test the HomeLink
ing the indicator light:
● Indicator light illuminates: Programming of a fixed code device has completed. The
garage door or other device should operate when a HomeLink
released.
● Indicator light flashes rapidly: The garage door opener motor or other device is
equipped with a rolling code. To complete programming, firmly press and hold the
®
HomeLink
button for 2 seconds then release it.
● If the garage door or other device does not operate, proceed to "Programming a rolling
code system".
5
Repeat the steps above to program another device for any of the remaining Home-
®
Link
buttons.
73
GX460_QG_OM60U10U_(U)
®
operation by pressing the newly programmed button and observ-
®
button is pressed and