Table of Contents
Advertisement
D E V I CE P A I RI N G
From most screens, pressing
a channel key will display the
relevant channels paired device
info. If channel shown is unpaired.
Press and hold
for 5 seconds to
enter pairing mode.
OK button
Press
to begin pairing
process.
Press and hold the appropriate
button (pair button) on the other
device to trigger pairing.
When a device is detected, this
will be displayed. If pairing is
unsuccessful, the HUBB will return
to the previous state and wait for
another attempt.
If pairing was successful this will
OK button
be displayed. Press
confirm the pairing.
D EVI C E UNPAI RI NG
C H ANNE L INF O
Further info related to
the other status icons
can be found on the
website:
to
www.wolfint.com
From the channel info screen,
press and hold the corresponding
channel key for 5 seconds to
enter the unpair screen.
OK button
Press
to confirm the
deletion of this device from this
channel.
From most screens, a press of a
channel key will display the paired
device's info.
The device's channel number and
name are displayed in the top left.
The device's battery level, signal
strength and other status icons
are displayed in the top right.
The last event type for this device
is shown in the bottom left,
and the time of the event in the
bottom right.
8
Advertisement
Table of Contents
