Table of Contents
Advertisement
A L E RT VO L U M E
A L E RT T O N E
N I G H T L I G H T S ET T I N G S
Go to second option 'Nightlight Brightness' and adjust as
desired.
Go to option 'Nightlight Colour' and adjust as desired.
Colours available:
Red - Green - Blue - Cyan - Yellow - Magenta - White & Off.
Go to 'Nightlight to Port'. When this option is turned on the
Nightlight colour should be copied to any connected Wolf
hanger or swinger.
In 'Advanced Menu' go 'Alert
Volume' to adjust the volume of
the bite Alarm alert.
In 'Advanced Menu' go 'Alert
Tone' to adjust the pitch on the
Alarm and the HUBB.
In 'Advanced Menu' go 'Nightlight
Config'. Find the first option titled
'Nightlight Brightness' and adjust
to manual setting.
D EVI C E ST AT US
Use the back button to leave 'Advanced Menu' and navigate
to the option titled 'Device Status' and enter sub menu using
OK button.
B AT TE RY L E VE L INDIC AT I O N
( PI NG P ONG)
R ANG E T E ST (PI NG PO NG)
A NT I- T HE F T
When turning off the connected Alarm, a tone should be
played on the Alarm and HUBB for theft prevention.
MU TE
Pressing the Mute button once should mute all connected
Alarms. On activation neither the HUBB or Alarm should play
a tone. A double press of the Mute button should undo the
mute on the HUBB and Alarms.
Navigate to the option 'Battery
Level'. This provides a detailed
measurement of the Alarms
battery level.
Navigate to the option 'Range
Test' and use the OK button to
begin the test. When a connection
is established the HUBB will
report the signal strength of
the connected Alarm and also
indicates that the LED is working.
12
Advertisement
Table of Contents
