Sony D8 Digital Handycam DCR-TRV210E Operating Instructions Manual page 81

Changing the MENU settings
Icon/item Mode
HiFi SOUND
r STEREO
AUDIO MIX
NTSC PB r ON PAL TV
PB MODE r AUTO
LCD B. L. r BRT NORMAL
LCD COLOUR
Notes on AUDIO MIX
•You can adjust the balance only for tapes recorded in the Digital8
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
Note on NTSC PB
You can play back tapes recorded in the NTSC video system, if the tape is recorded in the Digital8
system.
When you play back a tape on a Multi System TV, select the best mode while viewing the picture
on the TV.
Note on PB MODE
The mode will return to the factory setting when:
•you remove the battery pack or power source.
•you turn the POWER switch.
Notes on LCD B.L.
•When you select "BRIGHT", battery life is reduced by about 10 percent during recording.
•When you use power sources other than the battery pack, "BRIGHT" is automatically selected.
Meaning
To play back a stereo tape or dual sound track tape
with main and sub sound
1 To play back dual sound track tape with main
sound
2 To play back a dual sound track tape with sub
sound
To adjust the balance between the stereo 1 and
stereo 2
To playback a tape recorded in the NTSC colour
system on a PAL system TV
NTSC 4.43 To playback a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode
To automatically select the system (Hi8/standard 8
or Digital8) that was used to record on the tape, and
play back the tape
H/h To play back a tape that was recorded in the Hi8/
standard 8 system when your camcorder does not
automatically distinguish the recording system
To set the brightness on the LCD screen normal
BRIGHT To brighten the LCD screen
To adjust the colour on the LCD screen, turn and
press the SEL/PUSH EXEC dial
To lighten
ST1 ST2
To darken
POWER
switch
VTR
VTR
VTR
VTR
VTR
CAMERA
VTR
CAMERA
system.
81