Shooting with the LCD screen
You can also record the picture while looking at the LCD screen.
When using the LCD screen, the viewfinder screen turns off automatically. You cannot
monitor the sound from the speaker during recording.
(1) Open the LCD panel.
(2) Adjust angle of the LCD panel
The LCD panel moves about 90 degrees to this side and about 180 degrees to
the other side.
To adjust the brightness of the LCD screen, press LCD BRIGHT.
+ side: to brighten the LCD screen
– side: to dim the LCD screen
The battery life is longer when the LCD panel is closed. Use the viewfinder instead of
the LCD screen to save the battery power.
1
To let the subject monitor the shot
Turn the LCD panel 180 degrees (p. 25).
Notes on the LCD panel
• When closing the LCD panel, turn it vertically until it clicks [a].
• When turning the LCD panel, turn it always vertically; otherwise, the camcorder
body may be damaged or the LCD panel may not close properly [b].
• Close the LCD panel completely when not in use.
• Do not push nor touch the LCD when moving the LCD panel.
• You may find it difficult to view the LCD screen due to glare when using the
camcorder outdoors.
[a]
2
180˚
90˚
[b]
DCR-PC7E
LCD BRIGHT
13
3-858-632-12E (E32)